Home Improvement Mrspennington

It’s really not as difficult as some people think to install their own aluminum fence… be it for around their backyard or for around their swimming pool.

The hardest part is the actual digging of the holes. They’re usually 2′ into the ground with a diameter of about 6″. You can use a standard post hole digger or make the process easier by using a hydraulic auger.

Before you start digging all the post holes (usually 72.5″ on center for a residential fence), make sure you mark off where your gates are going to be located. Keep in mind before digging your gate holes, that a 4′ wide gate is usually measured as the opening size from the inside edge of one gate post over to the near side of the other gate post.

More information about hanging a gate can be found at the link at the bottom of this page.

All the aluminum fence sections come pre-assembled and are ready to install. Once the post is in the ground, slide the fence rails into the holes in the posts and secure them with a self-tapping screw that goes into the post and through the rail inside of the post. Do this for each rail. Once that’s done, you can pour concrete into the post hole that you previously dug out. Time to move to the next hole and repeat the process.

To make sure that all the posts are in a straight line, tie a string to a stake and hammer it in the ground 1′ past or behind the one end or corner post with the other end connected to a stake in the ground 1′ past the last end or corner post in that line. Make sure that each post is right next to the string, but not touching it. Also make sure that each post is plumb by checking each side with a level… before the concrete has a chance to dry.

Continue this for each straight run of fence before attempting to hang the gate.

Further aluminum fence and gate installation instructions can be found in the link at the bottom of this page.

We hope you found this information helpful.

For more information about purchasing your own aluminum or vinyl fence, visit our website below.

We have some very unique styles of aluminum fence that are made from American aluminum extrusions and then fabricated in North Carolina, USA… to make them completely American made and assembled. Not very many of our competitors can say they same.

My Home Improvement Project
I have been a part of many home improvement projects over the years and my most recent project was a four bedroom detached house located in Warrington. The idea started off as we would do the house up and sell it on for a profit. This is what my dad and I do in our spare time if you like. So we started work as we usually do and slowly the house took shape and I mean it really took shape. It truly did look spectacular when it was finished. However there were two problems;
1.We didnt want to sell it 2.We couldnt sell it if we wanted to
The house, although fantastic, would never fetch a fantastic price due to competition in the area. Our house is the biggest on the street and the only detached house as well but everyone seemed more interested in buying the house that is semi detached and slightly smaller and saving some money. So we decided to keep the house and truly turn it into a work of art.
How to personalize a house to make it a home
Well we where no longer selling the house so we could use a color scheme that we wanted. We had chocolate coloured furniture and the whole house including the kitchen and sofas followed this colour scheme so we decided that we could paint the walls a really dark crme colour which looked a lot better than boring white! Next we had to job of converting the garage into something of more value than a garage (the house was at the very end of the street so we had the whole road and the driveway to park in) as this seemed null and void to us.
This was a time consuming job but once it was done it truly did look amazing. The hardest part of this mini project if you like was changing the position of the door so you could go into the “mans den” from the hall rather than from the kitchen due to a long story and some unfortunate accidents along the way.
Now it was accessory time we bought a home entertainment system for the living room and mans den installed clapper lights in the bedrooms which where awesome and many more bits and bobs. Once this was done I was border line thinking about bumping off the old man just to have the house to myself (joking).
However we werent quite done. I looked at the French patio doors leading to the garden and a brainwave hit. My dad and I dont usually go for conservatories for a variety of reasons including price, profit margin and time. This meant the thought had never occurred to me, lets get a conservatory.
The conservatory project took four weeks and a lot of the work was outsourced. Once the piling was finished we thought the rest of the work would take no time at all but it turned out the opposite to be true. But once it was done I can honestly say that I was ready to buy my dad out and thats what I did (still paying him off!) and it was worth every penny.